Burkert Type 6027 - Direct-acting 2/2-way plunger valve (307787)

SKU: BUR.307787

HAN: 307787

Category: Type 6027 - Direct-acting 2/2-way plunger valve

Low stock level

148,87 €

incl. 19% VAT , plus

Manufacturers:

Bürkert

Valve 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics assembly (double coil technology) are available. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. NEMA 4X is available on request.

Direct-acting, powerful valve with diameter of up to DN13
Vibration-proof, bolted coil system
Energy-saving double coil technology with kick and drop variant
Explosion proof versions
High pressure variants for gases and liquids

Item information	Value
Seat seal material:	FKM (Fluor rubber)
Line connection 1:	Inner thread-1/2-NPT-
Voltage max / rated voltage:	120 V
Nominal pressure min:	0 bar
Operation:	direct-acting
Valve function:	A - normally closed - inlet port 1 (P/NC)
Nominal pressure max (liquid):	5,5 bar
Nominal pressure max (gas):	5,5 bar
Temperature medium:	-10 °C-140 °C-
Fluidic port connection number:	2
Valve function number of switching positions:	2
Valve function:	A - normally closed - inlet port 1 (P/NC)
Manual actuation:	No
Port connection 1 type:	Inner thread
Port connection 1 thread marking:	1/2
Port connection 1 thread type:	NPT
Port connection 2 type:	Inner thread
Port connection 2 thread type:	NPT
Type:	6027
Port connection 2 thread marking:	1/2
Voltage min / rated voltage:	120 V
Voltage max / rated voltage:	120 V
Voltage frequency:	60 Hz
Voltage tolerance positive:	10 %
Voltage tolerance negative:	10 %
AC voltage:	Yes
DC voltage:	No
Battery voltage:	No
Valve seat material:	Brass
Main valve wetted material:	Brass
Back-pressure-resistant version:	No
Nominal pressure min:	0 bar
Nominal pressure max (gas):	5,5 bar
Nominal pressure max (liquid):	5,5 bar
Temperature medium min:	-10 °C
Temperature medium max:	140 °C
Temperature environment min:	-10 °C
Temperature environment max:	55 °C
Seat seal material category:	Elastomer
Seat seal material:	FKM (Fluor rubber)
Sealing toward outside material:	FKM (Fluor rubber)
Rated power consumption:	17 W
Kv value (water):	0,95 m3/h
Main valve orifice 1 (P) (mm):	6 mm
Main valve orifice 1 (inch):	1/4 inch
Actuator type:	Plunger valve
Operation:	direct-acting
Media separation:	No
Flow:	Above seat
Power reduction integrated:	No
Main valve operating principle:	Globe valve
Valve construction:	Valve complete
Switch function:	on/off
Switch time open min:	20 ms
Switch time open max.:	30 ms
Switch time close min:	50 ms
Switch time close max.:	80 ms
Nominal operation/Duty cycle:	100 %
Vacuum version:	No
Analysis version:	No
Oxygen version:	No
Valve setting opening time:	No
Valve setting closing time:	No
Oil burner valve:	No
Steam version:	No
Installation length:	55 mm
Main valve with integrated screen:	No
Electrical connection sort:	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts:	2 + Grounding conductor
Cable plug in delivery:	enclosed
Electrical connection position:	in direction of flow left
Cable plug art. no. - type:	00137943 - 2509
Protection type (IP max. with suitable connector):	IP65
Low-noise version:	Energy saving technology not available
Coil type:	No
Coil insulation material (encasement):	placed on top
Coil size:	Epoxy
Coil wiring overvoltage protection:	42 mm
Coil wiring rectifier:	without
Coil wiring polarity recovery diode:	No
Thermal insulation class of the actuator:	for high temperatures
Coil special feature:	No
inrush power consumption AC:	H
Medium-contacting part core material:	105 V·A
Medium-contacting part stopper material:	Stainless steel

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de