Burkert Type 6027 - Direct-acting 2/2-way plunger valve (380709)

SKU: BUR.380709

HAN: 380709

Category: Type 6027 - Direct-acting 2/2-way plunger valve

Low stock level

517,29 €

incl. 19% VAT ,

Manufacturers:

Bürkert

Valve 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics assembly (double coil technology) are available. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. NEMA 4X is available on request.

Direct-acting, powerful valve with diameter of up to DN13
Vibration-proof, bolted coil system
Energy-saving double coil technology with kick and drop variant
Explosion proof versions
High pressure variants for gases and liquids

Item information	Value
Fluidic port connection number:	2
Valve function number of switching positions:	2
Valve function:	A - normally closed - inlet port 1 (P/NC)
Manual actuation:	No
Port connection 1 type:	Inner thread
Port connection 1 thread marking:	1/4
Port connection 1 thread type:	G
Port connection 2 type:	Inner thread
Port connection 2 thread type:	G
Type:	6027
Port connection 2 thread marking:	1/4
Voltage min / rated voltage:	230 V
Voltage max / rated voltage:	230 V
Voltage frequency:	50/60 Hz
Voltage tolerance positive:	10 %
Voltage tolerance negative:	10 %
AC voltage:	Yes
DC voltage:	Yes
Battery voltage:	Yes
Main valve wetted material:	Stainless steel
Valve seat material:	PEEK (Polyetheretherketone)
Back-pressure-resistant version:	No
Nominal pressure min:	0 bar
Nominal pressure max (gas):	100 bar
Nominal pressure max (liquid):	80 bar
Temperature medium min:	-10 °C
PN max (oil):	40 bar
Temperature medium max:	120 °C
Nominal pressure (DIN EN 1333):	PN 160
Temperature environment min:	-10 °C
Temperature environment max:	55 °C
Seat seal material category:	Technical ceramics
Seat seal material:	Oxide ceramics
Sealing toward outside material:	FKM (Fluor rubber)
Rated power consumption:	15 W
Kv value (water):	0,07 m3/h
Main valve orifice 1 (P) (mm):	1,5 mm
Main valve orifice 1 (inch):	1/16 inch
Actuator type:	Plunger valve
Operation:	direct-acting
Media separation:	No
Flow:	Above seat
Power reduction integrated:	No
Main valve operating principle:	Globe valve
Valve construction:	Valve complete
Switch function:	on/off
Switch time open min:	20 ms
Switch time open max.:	30 ms
Switch time close min:	50 ms
Switch time close max.:	80 ms
Nominal operation/Duty cycle:	100 %
Vacuum version:	No
Analysis version:	No
Oxygen version:	No
Valve setting opening time:	No
Valve setting closing time:	No
Oil burner valve:	No
Steam version:	No
Core guide:	Sliding ring
Installation length:	55 mm
Main valve with integrated screen:	No
Electrical connection sort:	Wire cable
Electrical connection number of contacts:	2 + Grounding conductor
Cable plug in delivery:	not included
Electrical connection position:	in direction of flow left
Protection type (IP max. with suitable connector):	IP65
Low-noise version:	Energy saving technology not available
Coil type:	No
Coil insulation material (encasement):	placed on top
Coil size:	Epoxy
Coil wiring overvoltage protection:	42 mm
Coil wiring rectifier:	without
Coil wiring polarity recovery diode:	No
Thermal insulation class of the actuator:	No
inrush power consumption AC:	12 W
Rated power AC:	15 V·A
Medium-contacting part core material:	15 V·A
Medium-contacting part stopper material:	Stainless steel
Rated power DC:	H
Reduced power DC:	15 W
Approval type:	IECEx, ATEX
Certification type:	Ex mb IIIC T130°C Db, II 2 G Ex mb IIC T4 Gb, II 2 D Ex mb IIIC T130°C Db, Ex mb IIC T4 Gb
Electrical connection wire length:	3.000 mm

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de