Schneider electric VPL12N Power Factor controller, PowerLogic PFC Controller, VPL 12

SKU: SND.VPL12N

HAN: VPL12N

GTIN: 3606480800115

HAN: VPL12N

Category: Reactive power controller

Low stock level

1.135,26 €

incl. 19% VAT ,

Manufacturers:

Schneider electric

Schneider electric: Schneider electric VPL12N Power Factor controller, PowerLogic PFC Controller, VPL 12 - Power Controller for an automatic power factor correction equipment to maintain the power factor

Power Controller for an automatic power factor correction equipment to maintain the power factor
Simple and efficient with ready to connect with RS485 modbus communication
Best in class performance, safety and reliability

Main
Range	PowerLogic
Product name	PowerLogic PFC Controller
Product or component type	Power factor controller
Device short name	VPL12

Complementary
Number of step output contacts	12
[Us] rated supply voltage	90...550 V AC <= 999 kV AC with external VT
Measurement current	0…5 A
Measurement voltage	90…550 V AC 50/60 Hz
Operating mode	Manual or automatic
Number of quadrant operation for generator application	4
Device connection	Communication protocol: Modbus interface: RS485
Input function	Switch: 1 x dry contact
Colour code	Front: dark grey RAL 7016
Display type	Backlit LCD
Display size	56 x 25 mm
Function available	Manual programming Automatic initialisation Automatic detection Advanced programming (expert) Any step sequence
Metering type	Power factor and displacement PF (signed, four quadrant) Total current harmonic distortion THD (I) Power factor average over lifetime Temperature maximum Phase current I1, I2, I3 RMS on load Active power P, P1, P2, P3 on load Reactive power Q, Q1, Q2, Q3 on load Apparent power S, S1, S2, S3 on load Voltage U21, U32, U13, V1, V2, V3 on load
Type of measurement	Capacitor current overload Irms/I1 Individual voltage harmonic Power factor Operating time Cos f Ambient temperature inside the cubicle Tan f
Information displayed	Number of switching cycles per step Individual step size in kVAr Remaining step capacity in %
Type of alarms	Step power loss (< 75 %) / Action: message and alarm contact + step blocked Step faulty / Action: message and alarm contact + step blocked High current (> 6 A CT) / Action: message and alarm contact Hunting (unstable regulation) / Action: message and alarm contact + step blocked Low current (< 15 mA CT) / Action: message and alarm contact Overcompensation / Action: message and alarm contact Capacitor current overload (Irms/I1) (> 130 % I1) / Action: message and alarm contact + step switched off Overtemperature (50 °C) / Action: message and alarm contact + step switched off Overtemperature (30 °C) / Action: fan switch Overvoltage (+/- 10 %) / Action: message and alarm contact + control stopped Total harmonic distortion (> 7 %) / Action: message and alarm contact + step switched off
Data recording	5 alarms
Operational Hours alarm	100000 h without maintenance
Operational counter alarm	65000 cycles without maintenance
Input type	Phase to phase Phase to neutral Insensitive to CT polarity Insensitive to phase rotation polarity Current input CT...X/5 A and X/1 A
Output type	Control relay: 0.2 A 110 V DC Control relay: 1 A 48 V DC Control relay: 2 A 400 V AC 50/60 Hz Control relay: 1 A 24 V DC Control relay: 5 A 250 V AC 50/60 Hz Control relay: 5 A 120 V AC 50/60 Hz Fan: 5 A 250 V AC 50/60 Hz Fan: 1 A 48 V DC Alarm relay: 5 A 250 V AC 50/60 Hz Alarm relay: 1 A 48 V DC
Maximum at the common terminal	10 A
Settings operating mode	Automatic Manual
Type of setting	Choice of stepping programs: auto Choice of stepping programs: LIFO Choice of stepping programs: linear Delay between 2 successive switch on the same step: 5...1200 s Step configuration programming: auto Step configuration programming: off Step configuration programming: fixed Target cos phi: 0.7 inductive...0.7 capacitive Target cos phi: dual cos f
Measurement accuracy	Voltage +/- 1 % Current +/- 1 % Frequency +/- 1 % Energy (P,Q,S) +/- 2 % Cos f +/- 2 % Total voltage harmonic distortion THD (U) +/- 2 % Individual voltage harmonic +/- 3 % Temperature +/- 3 °C
Time delay range	1...6500 s (on reconnection) 1...6500 s (on response)
Provided equipment	User manual
Mounting mode	Flush-mounted
Mounting support	Panel - thickness: 1…3 mm
Mounting location	In cabinet
Cut-out dimensions	138 x 138 mm
Height	144 mm
Width	144 mm
Depth	58 mm
Net weight	0.6 kg
Compatibility code	VPL 12

Item information	Value
Shipping weight:	0,72 kg
Item weight:	0,72 kg

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Schneider Electric GmbH, EUREF Campus 1, 40472 Düsseldorf, Nordrhein-Westfalen, Deutschland, [email protected], https://www.se.com

Product safety information

Manufacturer information:

Schneider Electric GmbH
EUREF Campus 1
Nordrhein-Westfalen
Düsseldorf, Deutschland, 40472
[email protected]
https://www.se.com

Manufacturer according to GPSR
Schneider Electric GmbH, EUREF Campus 1, 40472 Düsseldorf, Nordrhein-Westfalen, Deutschland, [email protected], https://www.se.com