VS XC100M12X00EP Vision sensors (11086399)

VS XC100M12X00EP Vision sensors (11086399)

SKU: BAU.11086399

HAN: 11086399

Category: Maximum functionality and versatility

Low stock level

4.956,35 €

incl. 19% VAT ,

Manufacturers:

Baumer

Vision sensors

Integrated flash controller
User management
Password protection
Backup & Restore function
Coordinate transformation
flexible result conjunction
Download VeriSens^® Application Suite: www.baumer.com/vs-sw

no description available

Technical data

General data
Resolution	1280 × 960 px
Sensor type	1/3″ CCD, monochrome
Illumination	direct connection (integrated flash controller)
Illumination connection	as accessory
High-resolution mode	max. 12 inspections per second
High-speed mode (limited resolution)	max. 25 inspections per second
Number of jobs (products)	≤ 255
Features per job	32
Signal processing	Baumer FEX^® 4.0
Defect image memory	8
Lens	C-mount
Electrical data
Voltage supply range +Vs	18 … 30 V DC
Power consumption	Typical 5 W (I_max = 1.5 A at 24 V)
Digital inputs	5 inputs (8 … 30 V) trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
Digital outputs	5 outputs (PNP) Pass / Fail Flash Sync Alarm Camera Ready Output Enable
Initial setup	Ethernet (10BASE-T / 100BASE-TX)
Process interface	TCP/UDP (Ethernet)
Visualization	web interface
Mechanical data
Width	53 mm (without lens/tube)
Height	99.5 mm (without lens/tube)
Depth	49.8 mm (without lens/tube)
Weight	≤ 300 g (without lens/tube)
Material	housing: aluminum cover glass: PMMA
Environmental conditions
Operating temperature	+5 … +55 °C @ T = measurement point
Storage temperature	-20 … +70 °C
Case temperature	max. +50 °C
Humidity	0 … 90 % (non-condensing)
Protection class	IP 67 (with tube)
Vibration load	IEC 60068-2-6 IEC 60068-2-64
Mechanical shock resistance	EN 60068-2-27
Feature checks
Part location	Part location on contours Part location on edges Part location on circle Part location on text line
Geometry	Distance circle angle count edges point position edge characteristics
Feature comparison	count contour points contour comparison brightness contrast area size count areas pattern comparison
Integrated flash controller
Voltage	12 V DC or 24 V DC (permanent) 24 V DC or 48 V DC (pulsed)
Current	I_max = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C) I_max = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C)
Flash time	max. 1 ms (Duty Cycle max. 1:10)
Conformity
Conformity	CE RoHS KC (R-R-BkR-VeriSens-XC-IP)
Non-volatile memory
Flash memory size	256 Mbit Flash S29GL256P10FFI010

Item information	Value
Resolution:	1280 × 960 px
Sensor type:	1/3″ CCD, monochrome
Illumination:	direct connection (integrated flash controller)
High-resolution mode:	max. 12 inspections per second
High-speed mode (limited resolution):	max. 25 inspections per second
Number of jobs (products):	≤ 255
Features per job:	32
Signal processing:	Baumer FEX® 4.0
Defect image memory:	8
Lens:	C-mount
Illumination connection:	as accessory