RR30.DAF0-GGPI.9VF/E029 Radar distance measuring sensors (11220109)

RR30.DAF0-GGPI.9VF/E029 Radar distance measuring sensors (11220109)

SKU: BAU.11220109

HAN: 11220109

Category: Radar sensors for distance measurement

Low stock level

1.138,00 €

incl. 19% VAT ,

Manufacturers:

Baumer

Radar distance measuring sensors

Small blind range 0.2 m
Push-pull and IO-Link outputs
Wide beam 12° opening angle
Suitable for structured surfaces (e.g. stones)
Ideal for level measurements in closed containers

no description available

Technical data

General data
Scanning range Sd	0.2 … 6 m
Scanning range close limit Sdc	0.2 … 6 m
Scanning range far limit Sde	0.2 … 6 m
Version	IO-Link dual channel
Repeat accuracy	2 mm
Response time ton	< 40 ms
Release time toff	< 40 ms
Temperature drift	<± 10 mm (Full Scale)
Power-up drift	Compensated after 20 min.
Adjustment	IO-Link
Light indicator	LED yellow
Power on indication	LED green
Carrier frequency	122 … 123 GHz
Band width	1 GHz
Range resolution	500 mm
Hysteresis typ.	5 % Sde
Linearity error	± 10 mm
Modulation type	FMCW
Transmitting power (EIRP)	< +20 dBm
Aperture angle	12 °
MTTF	> 126 years
Approvals/certificates	Ecolab FCC / CFR-47 part 15 (USA) RSS-210 Issue 10 (Canada) EN 305 550-1 V.1.2.1 (European Union) EN 305 550-2 V.1.2.1 (European Union)
Electrical data
Voltage supply range +Vs	12 … 30 VDC
Current consumption max. (no load)	200 mA
Baud rate	230.4 kBaud (COM 3)
Short circuit protection	Yes
Reverse polarity protection	Yes, Vs to GND
Output circuit	IO-Link / push-pull
Output current	100 mA 50 mA (out 2)
Voltage drop Vd	<2.5 VDC
Mechanical data
Design	Cylindrical threaded
Housing material	Stainless steel 1.4404 (V4A)
Width / diameter	30 mm
Height / length	97 mm
Connection types	Connector M12
Ambient conditions
Operating temperature	-40 … +65 °C
Storage temperature	-40 … +85 °C
Protection class	IP 68/69K & proTect+
Communication interface
Interface	IO-Link V1.1
Baud rate	230.4 kBaud (COM 3)
Cycle time	≥ 4 ms
Process data length	208 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement Bit 48-207 = 5 Peak (32 Bit Daten)
IO-Link port type	Class A
Additional data	Distance Excess gain Operating cycles Operating hours Boot cycles Operating voltage Device temperature Histograms Velocity
Adjustable parameters	Switching point Switching hysteresis Measured value filtering Measuring range Time filters Output logic Output circuit Counter Analog output characteristic LED status indicators Deactivate the sensor element Find Me function Switching window definition Signal sensitivity Signal selection (1. / 2. / strongest / last) Tracking mode
Predefined preference profiles	Precise (standard) Fill level fluid (slow) Fill level fluid (fast) Fill level solid Fast detection Tracking (slow) Tracking (standard) Tracking (fast)

Item information	Value
Ausführung:	IO-Link dual channel
Repeatability:	2 mm
Power on indication:	LED green
Light indicator:	LED yellow
Approvals/certificates:	Ecolab FCC / CFR-47 part 15 (USA) RSS-210 Issue 10 (Canada) EN 305 550-1 V.1.2.1 (European Union) EN 305 550-2 V.1.2.1 (European Union)
Temperature drift:	<± 10 mm (Full Scale)
Adjustment:	IO-Link
Scanning range Sd:	0.2 … 6 m
Scanning range close limit Sdc:	0.2 … 6 m
Scanning range far limit Sde:	0.2 … 6 m
Hysteresis typ.:	5 % Sde
Power-up drift:	Compensated after 20 min.
Response time ton:	< 40 ms
Release time toff:	< 40 ms
Linearity error:	± 10 mm
Carrier frequency:	122 … 123 GHz
Band width:	1 GHz
Range resolution:	500 mm
Modulation type:	FMCW
Transmitting power (EIRP):	< +20 dBm
Aperture angle:	12 °
MTTF:	> 126 years