O200.ER-GW1J.72NV/E026_H006 Through beam sensors (11230905)

O200.ER-GW1J.72NV/E026_H006 Through beam sensors (11230905)

SKU: BAU.11230905

HAN: 11230905

Category: For shiny and deep black objects

Low stock level

133,88 €

incl. 19% VAT , plus

Manufacturers:

Baumer

Through beam sensors

Most secure object detection due to the barrier principle
Manipulation-proof, simple teach-in via qTeach or line teach
IO-Link for extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

no description available

Technical data

General data
Type	Through beam sensor
Emitter / receiver	Receiver
Light source	Use with pulsed red LED
Actual range Sb	5 m
Nominal range Sn	6 m
Smallest object recognizable typ.	5 mm (0,5 mm with aperture)
Alignment / soiled lens indicator	Flashing output indicator
Output indicator	LED yellow
Power on indication	LED green
Sensitivity adjustment	Teach-in and IO-Link
Suppression of reciprocal influence	Yes
Electrical data
Response time / release time	< 0.5 ms
Jitter	< 0.15 ms
Voltage supply range +Vs	10 … 30 VDC
Current consumption max. (no load)	20 mA (@ 10 VDC)
Current consumption typ.	16 mA (@ 24 VDC)
Voltage drop Vd	<2 VDC
Output function	Light / dark operate
Output circuit	Push-pull
Output current	50 mA
Short circuit protection	Yes
Reverse polarity protection	Yes
Communication interface
Baud rate	230,4 kBaud (COM 3)
Adjustable parameters	Switching point Time filters LED status indicators Output logic Counter Deactivate the sensor element Find Me function Teach-in mode
IO-Link port type	Class A
Process data length	32 Bit
Process data structure	Bit 0 = SSC1 (presence) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 16-31 = 16 Bit measurement
Interface	IO-Link V1.1
Additional data	Signal strength Excess gain Operating cycles Device temperature
Cycle time	≥ 0.6 ms
Mechanical data
Width / diameter	8 mm
Height / length	25.1 mm
Depth	14.1 mm
Design	Rectangular
Mechanical mounting	Threaded sleeves M3 (stainless steel)
Housing material	Plastic (ASA, PMMA)
Front (optics)	PMMA
Connection types	Flylead connector M8 4 pin, L=200 mm
Cable characteristics	PVC / PVC 4 x 0.08 mm²
Ambient conditions
Operating temperature	-25 … +50 °C
Protection class	IP 67

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Product safety information

Manufacturer information:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com