O200.EL-GW2I.72NV/A014_FREC_H006 Through beam sensors (11230907)

O200.EL-GW2I.72NV/A014_FREC_H006 Through beam sensors (11230907)

SKU: BAU.11230907

HAN: 11230907

Category: For shiny and deep black objects

Low stock level

217,89 €

incl. 19% VAT ,

Manufacturers:

Baumer

Through beam sensors

Most secure object detection due to the barrier principle
IO-Link interface independent of the switching output (Dual Channel)
Extended parameterization options and additional diagnostic data
Quick mounting by means of M3 threaded bushes made of stainless steel

no description available

Technical data

General data
Type	Through beam sensor
Version	IO-Link dual channel
Emitter / receiver	Receiver
Light source	Use with pulsed red laser diode
Actual range Sb	5 m
Nominal range Sn	6 m
Smallest object recognizable typ.	3 mm (0,5 mm with aperture)
Alignment / soiled lens indicator	Flashing output indicator
Output indicator	LED yellow
Power on indication	LED green
Sensitivity adjustment	IO-Link
Suppression of reciprocal influence	Yes
Electrical data
Response time / release time	< 0.1 ms < 0.12 ms
Jitter	< 0.03 ms < 0.05 ms
Voltage supply range +Vs	10 … 30 VDC
Current consumption max. (no load)	20 mA (@ 10 VDC)
Current consumption typ.	10 mA (@ 24 VDC)
Voltage drop Vd	<2 VDC
Output function	Light / dark operate
Output circuit	Push-pull
Output current	50 mA, sum of all outputs
Short circuit protection	Yes
Reverse polarity protection	Yes
Communication interface
Baud rate	38.4 kBaud (COM 2)
Adjustable parameters	Switching point Time filters LED status indicators Output logic Output circuit Counter Deactivate the sensor element Find Me function Teach-in mode
IO-Link port type	Class A
Process data length	32 Bit
Process data structure	Bit 0 = SSC1 (presence) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 16-31 = 16 Bit measurement
Interface	IO-Link V1.1
Additional data	Signal strength Excess gain Operating cycles Device temperature
Cycle time	≥ 2.7 ms
Mechanical data
Width / diameter	8 mm
Height / length	25.1 mm
Depth	14.1 mm
Design	Rectangular
Mechanical mounting	Threaded sleeves M3 (stainless steel)
Housing material	Plastic (ASA, PMMA)
Front (optics)	PMMA
Connection types	Flylead connector M8 4 pin, L=200 mm
Cable characteristics	PVC / PVC 4 x 0.08 mm²
Ambient conditions
Operating temperature	-25 … +50 °C
Protection class	IP 67

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Product safety information

Manufacturer information:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com