UF200.RA0-GP1J.72N Ultrasonic retro-reflective sensors (11708351)

UF200.RA0-GP1J.72N Ultrasonic retro-reflective sensors (11708351)

SKU: BAU.11708351

HAN: 11708351

Category: Ultrasonic sensors for front mount

Low stock level

245,50 €

incl. 19% VAT ,

Manufacturers:

Baumer

Ultrasonic retro-reflective sensors

Most reliable object detection through barrier principle
Flexible parameterization and additional diagnostic data thanks to IO-Link
High performance in compact housing
Metal connector

no description available

Technical data

General data
Scanning range Sd	0 … 1000 mm
Reflector position Sde	20 … 1000 mm
Adjusting range reflector (operating range)	± 2,5 % Sde
Adjusting range reflector (limit range)	± 5 % Sde
Version	IO-Link
Repeat accuracy	0.5 mm
Response time ton/toff min	< 24 ms
Response time ton/toff standard	< 60 ms
Temperature drift	< 2 % of distance to target Sde
Power-up drift	Compensated after 15 min.
Sonic frequency	220 kHz
Adjustment	qTeach, line-Teach, IO-Link
Alignment aid	Light indicator flashing
Light indicator	LED yellow
Power on indication	LED green
Alignment measuring axis	< 2°
Electrical data
Voltage supply range +Vs	12 … 30 VDC
Current consumption typ.	12 mA
Output circuit	Push-pull
Output current	<100 mA
Voltage drop Vd	<3 VDC
Residual ripple	< 10 % Vs
Short circuit protection	Yes
Reverse polarity protection	Yes, Vs to GND
Communication interface
Interface	IO-Link V1.1
Baud rate	38.4 kBaud (COM 2)
Cycle time	≥ 12 ms
Process data length	48 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement
IO-Link port type	Class A
Additional data	Distance Excess gain Operating cycles Operating hours Boot cycles Operating voltage Device temperature Histograms
Adjustable parameters	Switching point Switching hysteresis Measured value filtering Time filters LED status indicators Output logic Output circuit Counter Beam forming Analog output characteristic Deactivate the sensor element Find Me function
Mechanical data
Design	Rectangular
Housing material	Plastic (ASA, PMMA)
Width / diameter	20.5 mm
Height / length	41 mm
Depth	15 mm
Connection types	Connector M8 4 pin
Ambient conditions
Operating temperature	-25 … +65 °C
Storage temperature	-25 … +75 °C
Protection class	IP 67

Item information	Value
Ausführung:	IO-Link
Repeatability:	0.5 mm
Power on indication:	LED green
Light indicator:	LED yellow
Temperature drift:	< 2 % of distance to target Sde
Adjustment:	qTeach, line-Teach, IO-Link
Scanning range Sd:	0 … 1000 mm
Power-up drift:	Compensated after 15 min.
Response time ton/toff min:	< 24 ms
Response time ton/toff standard:	< 60 ms
Sonic frequency:	220 kHz
Alignment measuring axis:	< 2°
Alignment aid:	Light indicator flashing
Reflector position Sde:	20 … 1000 mm
Adjusting range reflector (operating range):	± 2,5 % Sde
Adjusting range reflector (limit range):	± 5 % Sde