Burkert Type 8756 - Mass flow controller (MFC)/mass flowmeter (MFM) for liquids (374108)

SKU: BUR.374108

HAN: 374108

Category: Type 8756 - Mass flow controller (MFC)/mass flowmeter (MFM) for liquids

Low stock level

5.226,48 €

incl. 19% VAT ,

Manufacturers:

Bürkert

Meter | H2O | 25,00kg/h | 24 V DC | Internal thread - G1/8

The mass flow controller (MFC) / mass flow meter (MFM) Type 8756 is particularly suitable for the very precise measurement or control of small quantities of liquid that also require a medium-separated sensor. The measuring principle of the sensor is based on the Coriolis effect and is completely independent of the medium. Pressure and temperature deviations have no impact on the measuring accuracy. In addition to the flow rate, the density and temperature of the liquid are measured. The device design enables a stable flow measurement that is immune to external impacts and does not require a zero-point adjustment when the process conditions change. All materials that come into contact with the medium are highly resistant and enable use with a variety of liquids, whether aggressive or neutral media. Type 8756 is available in the variants MFM, MFC with an interface for a modular actuator, MFC with integrated proportional valve and MFC with integrated micro annular gear pump. The high-precision pump is self-priming and the space in contact with the medium is sealed hermetically. It offers a very large control range and generates extremely low pulsations. This variant is used as a control or dosing system for liquids which have to be conveyed from an unpressurised container.

Flow measurement/control up to 120 kg/h
Very high accuracy and measuring range
High long-term stability, no zero-point adjustment necessary
Highly resistant wetted materials
Suitable for numerous liquids

Item information	Value
Work area medium 1:	25
Unit medium 1:	kg/h
Operating medium 1:	H2O
Calibration medium 1:	Water
Port connection 1 type:	Internal thread
Calibration pressure medium 1 at Qnom:	4
Units for pressure specifications:	bar (ü)
Measuring or control range:	depends on flow rate
Port connection 1 standard:	G
Port connection 2 standard:	G
Type:	8756
Supply voltage:	24 V DC
Power consumption according to UL61010-1:	2 W
Typical electrical power consumption:	2 W
Fluidics body material:	Stainless steel
Maximum pressure medium:	100
Seat size:	without body
Control mode Batch:	No
Device function:	Meter
Impact protection cover available:	Yes
Electronics body material:	Aluminium
Output type digital quantity:	0
Seat seal material:	FFKM (Perfluoroelastomer rubber)
Output signal:	büS
Sealing toward outside material:	FFKM (Perfluoroelastomer rubber)
Mounting position:	any
Actuator type:	without actuator
Electrical connection 1 type:	Plug - M12
Protection type (IP max. with suitable connector):	IP65
Input type digital quantity:	0 PCE

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de