Burkert Type 8045 - Insertion magnetic inductive flowmeter (449672)

SKU: BUR.449672

HAN: 449672

Category: Type 8045 - Insertion magnetic inductive flowmeter

Low stock level

1.574,37 €

incl. 19% VAT ,

Manufacturers:

Bürkert

The electromagnetic flowmeter 8045 is made up of an electronic module including a backlit display, operating keys and a sensor consisting of PVDF or stainless steel material. It has been designed to measure a flow rate of neutral and slightly aggressive fluids with a conductivity of more than 20 µS/cm in DN 06…DN 400 pipes. It is equipped with a 4…20 mA output, a digital output (pulse output by default). Some versions are equipped with two relay outputs and one digital input. Two independent totalizers allow counting the flow rate. The available process connections are: - G2” connection for the version with a PVDF sensor - G2” or clamp connection for the version with a stainless steel sensor. The version with a stainless steel sensor can be used in applications with higher pressures (PN 16) and higher temperatures (110 °C). The version with Alloy C22 electrodes has been designed for applications with aggressive fluids (chemicals) and especially sea water applications.

Sensor without moving parts
Indicates both flow rate and volume
Simulation of all output signals
Clean in place (CIP), FDA-compliant materials
Version with Alloy C22 electrodes

Item information	Value
Nominal voltage:	18,0 V - 36 V
Temperature range:	-15,00 °C - 110,00 °C
Measurement:	Flow rate
Sensor type:	Magnetic inductive
Output 1 digital type:	Transistor
Gasket sensor/housing:	FKM (fluororubber)
Sensor fitting material:	Stainless steel
Fluid side seal:	FKM (Fluor rubber)
Sensor type:	Magnetic inductive
Magnetic inductive type:	Insertion
Detection of flow direction:	Yes
Electrode material:	Stainless steel
sensor holder material composition:	Metals
Sensor holder material:	Stainless steel
Insertion sensor length:	long
Dynamic viscosity min.:	0 cP
Dynamic viscosity max.:	2.000 cP
Flow rate (volume):	Yes
Type:	8045
Flow rate (mass):	No
Temperature:	No
Density:	No
Concentration 1:	No
Precision of volume flow rate in relation to reading:	0,5 %
Conductivity min:	20 µS/cm
Battery voltage:	No
DC voltage min.:	18 V
DC voltage max.:	36 V
Nut material:	PPA
Screws material:	Stainless steel
Attachment part material:	PSU (polysulfone)/PPSU (polyphenylsulfone)
Cover material:	PPA
Protective cover material:	PSU (polysulfone)/PPSU (polyphenylsulfone)
Temperature medium min:	-15 °C
Electronics body material category:	Plastics
Temperature medium max:	110 °C
Electronics body material:	PPA
Nominal pressure (DIN EN 1333):	PN 16
Temperature environment min:	-10 °C
Temperature environment max:	60 °C
Sensor/housing seal material:	FKM (fluororubber)
Seal housing/cover material:	NBR
Protective cover seal material:	Silicone
Medium-contacting parts seal material:	FKM (Fluor rubber)
Time dosing:	No
Batch dosing:	No
Extended diagnosis:	No
Continuous measurement:	Yes
Volumeter:	Yes
Dosing:	No
Switch:	No
Parametrisation local:	Yes
Parametrisation separate:	No
Parametrisation fixed:	No
Product sub-group:	Flow rate
Construction device:	Compact
Fitting electronic interface:	Insertion 2 (inch)
Electrical connection 1 type:	Cable gland M20
Electrical connection 1 quantity:	2 PCE
Electrical connection seal 1 material:	Neoprene
Operating supply type:	3 conductor
Output type analog quantity:	1
Output 1 type analog current:	4-20 mA
Output analogue current functioning principle source:	Yes
Output analogue current functioning principle drain:	Yes
Output 1 digital type:	Transistor
Digital output 1 transistor contactless:	0,1 A
Output 1 digital transistor connection NPN:	Yes
Output 1 digital transistor connection PNP:	Yes
Display type:	Display
Protection class measurement device (IP):	IP65
Front foil material category:	Plastics
Front foil material:	Polyester
Electrode holder material:	PEEK (polyetheretherketone)
Electrical connection 1 gender:	Terminal block
Electrical connection 1 material category:	Plastics
Electrical connection 1 material:	PA (Polyamide)

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de