Burkert Type 8012 - Flowmeter with paddle wheel for continuous flow measurement (556176)

SKU: BUR.556176

HAN: 556176

Category: Type 8012 - Flowmeter with paddle wheel for continuous flow measurement

Low stock level

800,04 €

incl. 19% VAT ,

Manufacturers:

Bürkert

The paddle wheel flow meter is available in magnetic or optical variant. The magnetic variant of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical variant is exclusively intended for use with infrared transparent liquids. The Type 8012 consists of a fitting (Type S012) and an electronic module (Type SE12) which are connected together with screw. The Bürkert designed fitting system ensures simple installation into all pipes from DN 06…DN 65. The Type 8012 can also be integrated in customer-specific block systems. Depending on the electronics module, the Type 8012 is equipped: - with a pulse output or - with a pulse output and a 4…20 mA current output. The pulse output, which can be transmitted and processed by a Bürkert remote transmitter/controller, generates a configurable frequency proportional to the flow rate or can be used as a switch output.

Economic integration in pipe systems without any additional pipelines
Optic or magnetic measuring principle
Outputs: one analogue output 4...20 mA and/or one transistor output (frequency or switch)
Outputs configurable (through interface on USB port with PC)

Item information	Value
Nominal voltage:	12,0 V - 36 V
Temperature range:	-15,00 °C - 100,00 °C
Measurement:	Flow rate
Sensor type:	Paddle wheel
Output 1 digital type:	Transistor
Gasket sensor/housing:	EPDM (Ethylene-propylene-diene rubber)
Sensor fitting material:	PVDF (Polyvinylidene fluoride)
Paddle wheel type:	Optical
Sensor type:	Paddle wheel
Fluidic port connection number:	2
Detection of flow direction:	Yes
Paddle wheel material:	PVDF (Polyvinylidene fluoride)
Paddle wheel measuring principle detection:	Infrared
Paddle wheel type:	Optical
Port connection 1 type:	Weld end
Paddle wheel axle material:	Ceramic
Bearing material category:	Technical ceramics
Bearing material:	Ceramic
Dynamic viscosity min.:	0 cP
Port connection 2 type:	Weld end
Dynamic viscosity max.:	300 cP
Flow rate (volume):	Yes
Type:	8012
Flow rate (mass):	No
Port connection 1 size DN:	DN 10
Temperature:	No
Density:	No
Min measured value of volume flow rate:	54
Port connection 2 size DN:	DN 10
Concentration 1:	No
Max measured value of volume flow rate:	1.810
Precision of volume flow rate in relation to reading:	1 %
Measured value unit:	l/h
Battery voltage:	No
DC voltage min.:	12 V
DC voltage max.:	36 V
Screws material:	Stainless steel
Port connection material category:	Metals
Port connection material:	Stainless steel
Temperature medium min:	-15 °C
Electronics body material category:	Plastics
Temperature medium max:	100 °C
Electronics body material:	PPS (Polyphenylene sulphide)
Nominal pressure (DIN EN 1333):	PN 16
Temperature environment min:	-15 °C
Measuring pipe material:	Stainless steel
Temperature environment max:	60 °C
Seal housing/cover material:	EPDM (Ethylene-propylene-diene rubber)
Diameter measuring tube (DN):	8 mm
Medium-contacting parts seal material:	EPDM (Ethylene-propylene-diene rubber)
Continuous measurement:	Yes
Roughness of pipe inside:	1,6 µm
Dosing:	No
Roughness of pipe outside:	3,2 µm
Switch:	Yes
Armature material:	PVDF (Polyvinylidene fluoride)
Parametrisation local:	No
Parametrisation separate:	No
Parametrisation fixed:	Yes
Product sub-group:	Flow rate
Construction device:	Compact
Electrical connection 1 type:	Plug - M12
Output 1 digital version NC:	No
Electrical connection 1 quantity:	1 PCE
Output 1 digital version NO:	No
Electrical connection 1 number of contacts:	5 PCE
Electrical connection seal 1 material:	EPDM (ethylene propylene diene rubber)
Installation length:	96 mm
Operating supply type:	3 conductor
Output type analog quantity:	1
Output 1 type analog current:	4-20 mA
Cable plug in delivery:	not included
Output analogue current functioning principle source:	No
Output analogue current functioning principle drain:	Yes
Output 1 digital type:	Transistor
Digital output 1 transistor contactless:	0,7 A
Output 1 digital transistor connection NPN:	Yes
Output 1 digital transistor connection PNP:	No
Protection class measurement device (IP):	IP67
Output type analog sinus:	No
Output type current modulated according to NAMUR:	No
Display:	No
Port connection 1 wall thickness (mm):	1,5 mm
Electrical connection 1 gender:	male
Port connection 2 wall thickness (mm):	1,5 mm
Electrical connection 1 material category:	Plastics
Electrical connection 1 material:	PA (Polyamide)
Manufacturer´s test certificate 3.1 included:	Yes
Port connection 1 pipe standard 2:	DIN 11866 serie A
Port connection 2 pipe standard 2:	DIN 11866 serie A
Port connection 1 inner diameter (mm):	10 mm
Port connection 2 inner diameter (mm):	10 mm
Port connection 1 pipe standards 1:	DIN 11850 R2
Port connection 2 pipe standards 1:	DIN 11850 R2
Port connection 1 outer diameter (mm):	13 mm
Port connection 2 outer diameter (mm):	13 mm

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de