Burkert Type 8012 - Flowmeter with paddle wheel for continuous flow measurement (556193)

SKU: BUR.556193

HAN: 556193

Category: Type 8012 - Flowmeter with paddle wheel for continuous flow measurement

Low stock level

736,85 €

incl. 19% VAT ,

Manufacturers:

Bürkert

The paddle wheel flow meter is available in magnetic or optical variant. The magnetic variant of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical variant is exclusively intended for use with infrared transparent liquids. The Type 8012 consists of a fitting (Type S012) and an electronic module (Type SE12) which are connected together with screw. The Bürkert designed fitting system ensures simple installation into all pipes from DN 06…DN 65. The Type 8012 can also be integrated in customer-specific block systems. Depending on the electronics module, the Type 8012 is equipped: - with a pulse output or - with a pulse output and a 4…20 mA current output. The pulse output, which can be transmitted and processed by a Bürkert remote transmitter/controller, generates a configurable frequency proportional to the flow rate or can be used as a switch output.

Economic integration in pipe systems without any additional pipelines
Optic or magnetic measuring principle
Outputs: one analogue output 4...20 mA and/or one transistor output (frequency or switch)
Outputs configurable (through interface on USB port with PC)

Item information	Value
Nominal voltage:	12,0 V - 36 V
Temperature range:	-15,00 °C - 100,00 °C
Measurement:	Flow rate
Sensor type:	Paddle wheel
Output 1 digital type:	Transistor
Gasket sensor/housing:	FKM (fluororubber)
Sensor fitting material:	PVDF (Polyvinylidene fluoride)
Paddle wheel type:	Optical
Sensor type:	Paddle wheel
Fluidic port connection number:	2
Detection of flow direction:	Yes
Paddle wheel material:	PVDF (Polyvinylidene fluoride)
Paddle wheel measuring principle detection:	Infrared
Paddle wheel type:	Optical
Port connection 1 type:	Inner thread
Paddle wheel axle material:	Ceramic
Port connection 1 thread marking:	1
Bearing material category:	Technical ceramics
Port connection 1 thread type:	G
Bearing material:	Ceramic
Dynamic viscosity min.:	0 cP
Port connection 2 type:	Inner thread
Dynamic viscosity max.:	300 cP
Port connection 2 thread type:	G
Flow rate (volume):	Yes
Port connection 2 thread marking:	1
Type:	8012
Flow rate (mass):	No
Temperature:	No
Density:	No
Min measured value of volume flow rate:	689
Concentration 1:	No
Max measured value of volume flow rate:	22.963
Precision of volume flow rate in relation to reading:	1 %
Measured value unit:	l/h
Battery voltage:	No
DC voltage min.:	12 V
DC voltage max.:	36 V
Screws material:	Stainless steel
Port connection material category:	Light metals
Port connection material:	Brass
Temperature medium min:	-15 °C
Electronics body material category:	Plastics
Temperature medium max:	100 °C
Electronics body material:	PPS (Polyphenylene sulphide)
Nominal pressure (DIN EN 1333):	PN 16
Temperature environment min:	-15 °C
Measuring pipe material:	Brass
Temperature environment max:	60 °C
Seal housing/cover material:	EPDM (Ethylene-propylene-diene rubber)
Diameter measuring tube (DN):	25 mm
Medium-contacting parts seal material:	FKM (Fluor rubber)
Continuous measurement:	Yes
Dosing:	No
Switch:	Yes
Armature material:	PVDF (Polyvinylidene fluoride)
Parametrisation local:	No
Parametrisation separate:	No
Parametrisation fixed:	Yes
Product sub-group:	Flow rate
Construction device:	Compact
Electrical connection 1 type:	Plug - M12
Electrical connection 1 quantity:	1 PCE
Output 1 digital version NC:	No
Electrical connection 1 number of contacts:	5 PCE
Output 1 digital version NO:	No
Electrical connection seal 1 material:	EPDM (ethylene propylene diene rubber)
Installation length:	104 mm
Operating supply type:	3 conductor
Output type analog quantity:	1
Output 1 type analog current:	4-20 mA
Cable plug in delivery:	not included
Output analogue current functioning principle source:	Yes
Output analogue current functioning principle drain:	No
Output 1 digital type:	Transistor
Digital output 1 transistor contactless:	0,7 A
Output 1 digital transistor connection NPN:	Yes
Output 1 digital transistor connection PNP:	No
Protection class measurement device (IP):	IP67
Output type analog sinus:	No
Output type current modulated according to NAMUR:	No
Display:	No
Electrical connection 1 gender:	male
Electrical connection 1 material category:	Plastics
Electrical connection 1 material:	PA (Polyamide)

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de