SICK Automation light grids SLG-2 SLG10S-020SBR21D4D (1148591)

SICK Automation light grids SLG-2 SLG10S-020SBR21D4D (1148591)

SKU: SIC.1148591

HAN: 1148591

Category: HLG

Low stock level

776,65 €

incl. 19% VAT ,

Manufacturers:

Sick

Features

Included with delivery

1 × sender

1 × receiver

1 × Quick Start Guide

1 x safety notes

Functional principle

Sender/receiver

Sensing range
Limit values	500 mm ... 8,500 mm
Parallel beam (recommended)	500 mm ... 6,000 mm
9 x cross beam (recommended)	500 mm ... 6,000 mm

Blind zone
Distance from 1st Beam to leading edge of housing (connection side)	4.6 mm
Distance from last beam to leading edge of housing (top)	4.6 mm ¹⁾

Detection height

200 mm

Beam separation

10 mm

Optical light exit

Slim

Detection capability
Minimum detectable object (MDO), parallel beam	15 mm ²⁾
Minimum detectable object (MDO), 9 x cross beam	= 6.5 mm ²⁾
Minimum object width (MOW), 9 x cross beam	26 % ³⁾
	⁴⁾

Factory setting
Beam function	9 x cross beam
Pin 2 (MF)	Object detection output = “HIGH”
Pin 4 (OUT)	Object detection output = “LOW”
IO-Link (process data)	Q_L/Q_int Status, System status, Beam status
Teach-in (default)	Auto teach-in

Adjustment
IO-Link	For configuring the sensor parameters and Smart Task functions

Emitted beam
Light source	LED
Type of light	Infrared light
Number of beams	20

LED key figures
Normative reference	EN 62471:2008-09 \| IEC 62471:2006, modified
LED risk group marking	Free group
Wave length	850 nm
Average service life	Average service life: 100,000 h at T_U = +25 °C

Time specifications
Initialization time	0.4 s ... 2 s ⁵⁾
Teach-in time	0.75 s ... 50 s ⁵⁾
Scan time, parallel beam	2.5 ms
Scan time, cross beam	5 ms
Repeatability, parallel beam	2.5 ms
Repeatability, cross beam	7.5 ms
Minimum dwell time, parallel beam	10 ms
Minimum dwell time, cross beam	20 ms
Max. response time, parallel beam	12.6 ms
Max. response time, cross beam	25.1 ms

Type of synchronization

Optical (2 beams)

Communication interface

IO-Link	? , V1.1
Data transmission rate	COM3 (230,4 kBaud)
Cycle time	2.3 ms
Process data length	32 Byte
Maximum cable length	20 m

Electronics

Supply voltage U_B

DC 18 V DC ... 30 V DC ¹⁾

Ripple

= 1.3 V_pp

Power consumption
Sender	= 58 mA ²⁾
Receiver	= 51 mA ²⁾

Digital output
Number	2
Type	Push-pull: PNP/NPN
Output signal voltage HIGH/LOW	U_B-3 V/<3 V
Output load, Inductive	1 H
Output load, capacitive	100 nF
Output current I_max.	100 mA
Output current, rest	< 0.5 mA

Digital input
Number	1
Input signal voltage HIGH/LOW	>15 V/<5 V

Protection class

III ³⁾

UL File No.

NRKH.E181493 & NRKH7.E181493

Circuit protection

U_V connections, reverse polarity protected

Output Q short-circuit protected

Outputs overcurrent and short-circuit protected

Mechanics

Dimensions (W x H x D)
Width	11.8 mm
Height	199.2 mm
Depth	24.1 mm

Connection type

Cable with M12 male connector, 4-pin

Connection type Detail
Cable diameter	3.4 mm
Conductor cross section	0.14 mm²
Length of cable	150 mm
Cable material	PVC

Material
Housing	Aluminum
	Plastic
Front screen	PMMA

Weight

760 g

Overvoltage protection (required)

Ambient data

Enclosure rating	IP65 ¹⁾ IP67
Ambient temperature, operation	–25 °C ... +55 °C
Ambient temperature, storage	–25 °C ... +70 °C
Ambient light immunity	Indirect: 50,000 lx ²⁾
Shock resistance	10 g, 16 ms, DIN EN 60068-2-27
Vibration resistance	10-150 Hz 0.5 mm, IEC 60068-2-6
Air humidity	= 96 %, relative humidity (no condensation)
Electromagnetic compatibility (EMC)	EN 61000-6-2, EN 61000-6-4

Smart Task

Smart Task name

Base logics

Logic function

Direct

AND

Timer function

Deactivated

Switch-on delay

Off delay

ON and OFF delay

Impulse (one shot)

Switching signal
Switching signal Q_L1	Switching output
Switching signal Q_L2	Switching output, external input

Diagnosis

Diagnostics functions
Device state	Hardware error, temperature warning, operating hours warning
Communication state	Pin short-circuit error, invalid process data
Status of the light signal	Teach error, synchronization error, quality-of-run alarm
Alarm output	Yes

Certificates

EU declaration of conformity	?
UK declaration of conformity	?
ACMA declaration of conformity	?
Moroccan declaration of conformity	?
China-RoHS	?
cULus certificate	?
IO-Link	?
Photobiological safety (IEC EN 62471)	?

Item information	Value
Connection type:	Cable with M12 male connector, 4-pin
Operating range:	6 m
Beam separation:	10 mm
Detection height:	200 mm
Switching distance, parallel beam (recommended):	500 mm ... 6000 mm, Increased sensing range
Optical light emission:	Slim
Item weight:	99,00 kg

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
SICK AG, Erwin-Sick-Str. 1, 79183 Waldkirch, Baden-Württemberg, Deutschland, [email protected], https://www.sick.com

Product safety information

Manufacturer information:

SICK AG
Erwin-Sick-Str. 1
Baden-Württemberg
Waldkirch, Deutschland, 79183
[email protected]
https://www.sick.com

Manufacturer according to GPSR
SICK AG, Erwin-Sick-Str. 1, 79183 Waldkirch, Baden-Württemberg, Deutschland, [email protected], https://www.sick.com